Modular Side-grip Pile Drivers

Movax Pile Driver

ML-15 for driving and extracting steel- or plastic sheet piles, tubes and wooden poles by changeable clamps. Designed for 5 - 8 tons excavators.

Movax MLR-15 is a new product for installation of small foundation tubes, H-beams or timber piles. MLR-15 is designed to meet the high position accuracy and straightness demands at solar panel fields. MLR-15 makes it possible to use light weight piling material, as MLR is able to take side-grip of pile closer to ground level which means that the flexibility of pile does not disturb. Using lightweight piling material and standard midi excavator for piling process reduces costs of micro piling project.

Movax MLR-15 can grip pile lying on the ground, lift it up to vertical position, locate it and then drive it into the ground with a straight linear movement of the rig. If the pile is not correctly positioned or it stops against stone, it is possible to remove the pile with this same rig.

MLR-15 needs only a quick steering system installation into excavator, so it is possible to use this same piling rig on several excavators. Side-grip clamps are quick change type, which enables fast change between different piling materials. There are clamps available for steel tubes, Hbeams and timber piles. Customer can also request clamps for other special profiles.

Accessories: Manual operating device, Quick change side grip clamps, Adapter plate, End grip (optional), Top hitter for timber piles (optional).

ML15 BROCHURE MLR15 BROCHURE
Movax Pile Driver
Movax Pile Driver

Modular Side-grip Pile Drivers - ML-25 & ML-30

Movax Pile Driver

ML series piler comes in two versions: the ML-25 for backhoes and the ML-30 for 13-16 ton excavators.

Easy changing of the pile clamps. The side-grip clamps can be quickly changed on the connection surface enabling easy swap from sheet piles or H-beams to round steel or timber piles. Biggest diameter of tubular pile is 457 mm. Adjustable gripping force ensures a firm and safe grip without damaging the pile.

Light weight (1200kg) design makes handling of this unit easier also with wheeled excavators, smallest railroad vehicles, dredgers and backhoes.

High quality piston motor and other hydraulic components are made to work under high pressure. ML-30 units can work at full system pressure up to 350 bar on most excavators. ML-25 runs at 220 bar on backhoes but even this unit has designed to resist 350 bar.

Smart design. Reliability, safety and user-friendliness are the basis of the design. Hydraulic valves are located to safe yet accessible place under the tilt plate. Amount of hydraulic hoses are minimised and clamping cylinders are protected.

ML23 & ML30 BROCHURE
Movax Pile Driver
Movax Pile Driver

Modular Side-grip Pile Drivers - SG-30R & SG40R

Movax Pile Driver

The SG-30R and SG40R models bring Movax Side Grip technology to the utility sector, especially where work is required to be undertaken by wheeled or small tracked excavators.

Whether the job is installing temporary or permanent retaining walls or cofferdams, tube of H-beam bearing piles, timber piles or trench sheets, the Movax Modular Arm System offers interchangeable insert clamps to quickly convert between pile driving requirements.

Continuous development and the ability to produce insert clamps for most specific requirements will ensure the SG-30R/SG-40R models continue to meet future needs as well.

SG-30 - 40 BROCHURE
Movax Pile Driver
Movax Pile Driver

Modular Side-grip Pile Drivers - SG-45 & SG45V

Movax Pile Driver

Designed to match the capabilities of the popular medium size excavators from 20 to 30 ton Movax SG-45 Side-Grip vibratory pile drivers have many applications in all fields of civil engineering, general construction and railway industry.

Movax SG-V’s are high frequency vibratory pile drivers with variable eccentric moment. Disturbance of surrounding environment is minimised by operating at high frequency and avoiding an oscillation at natural frequencies of the surrounding structures. Resonance free start up and shut down means the SG-V is the right choice when working in urban areas, near historical buildings or in any sensitive environment.

Excavator from 20 to 30 ton. Pile lenght/weight: 7.8m/2300kg, 12m/1850kg, 16m/1400kg.

SG-45 SERIES BROCHURE
Movax Pile Driver
Movax Pile Driver

SG-50 | SG-50V | SG60 | SG60V

Movax Pile Driver

Designed to match the capabilities of the popular medium size excavators from 20 to 30 ton Movax SG-50 and SG-60 Side-Grip vibratory pile drivers have many applications in all fields of civil engineering, general construction and railway industry.

Movax SG-V’s are high frequency vibratory pile drivers with variable eccentric moment. Disturbance of surrounding environment is minimised by operating at high frequency and avoiding an oscillation at natural frequencies of the surrounding structures. Resonance free start up and shut down means the SG-V is the right choice when working in urban areas, near historical buildings or in any sensitive environment.

Excavator from 23 to 32 ton. Pile lenght/weight: 7.8 m/2’300 kg, 12 m/1’850 kg, 16 m/1’400 kg.

SG-50 - 60V BROCHURE
Movax Pile Driver
Movax Pile Driver

SG-65AR | SG-75TR

Movax Pile Driver

Movax SG-65AR and SG-75TR Side-Grip vibratory pile drivers are made to match the capabilities of larger excavators from 28 to 40 tonnes. These powerful vibros combine the robust structure with excellent pile handling characteristics.

The machine is based on the Movax Modular System (MMS). SG-65AR and SG-75TR are fitted with heavy-duty clamps to take the heavy loads of driving the sheet piles, H-piles, tubular steel piles and other pile sections.

CATALOGUE
Movax Pile Driver
Movax Pile Driver